CONCEPT
WINSIX® IMPLANT SYSTEM has been projected to give the operator the maximum of ergonomics, versatility and simplicity!
WINSIX® IMPLANT SYSTEM has been always concentrated on the three fundamental aspects of surgical phase, prosthetic components and linkage between the components, but the system has constantly paid attention to the prosthetic aspects of implant-prosthesis, knowing that the prosthetic manufacture is the final ring of the therapy!
Characteristic qualities are the colour code according to the different diameters of the components (3,3 mm: green; 3,8 mm: yellow; 4,5 mm: red; 5,9 mm: blue) and the same internal and hexagonal connection foe every implant.
Restoring the patient's smile
The main purpose of an implant prosthesis is to enable the patient to have comfort, security and freedom from worry. Use of the WINSIX® implant allows the operator to choose the best design for the different treatment and the wished prosthetic solution.
Between implant designs we can choose the cylindrical, the conical or the new troncoconical one with a concave and flaring neck and an augmented platform.
The “Integrate Implant System” Winsix®, since every implants present the same retentive element, independently of shape, diameter and length, allows the technique of “Platform Switching”, with or without the enlarged platform. This technique, that use a coping smaller than implant platform diameter, seem to reduce the physiological bone loss around implant.
Prosthetic alternatives range from anti-rotational copings for single implant, to the FREE TENSE SYSTEM®, a system of copings for the construction of bars and screwed-in prostheses that are tension-free, enabling the operator to make a prosthesis which is not only secure but accords with the most demanding aesthetic and functional requirements.
Project synthesis and total quality
To ensure a consistent result, internal quality controls include, in addition to the standard checks required by European regulations, further controls such as unified checking of the retentive element and unified checking of sterilisation. Since July 1998 the Winsix implant lines are produced in conformity with 94/42 CEE rule.
A system suited to different types of clinical situation
In the surgical phase there could be a lot of different realities: from the post-extraction implant to the bone regenerative processes (GBR) and from bone densities type D1 to type D4. Through Winsix®-implant particular micro- and macro-topography it is possible to solve every clinical case easily and safely. Profiles of every different implant types offer the possibility, if there should be the demand, to change the kind of operation (biphasic or monophasic) and the kind of position (submerged or half-submerged).